3M - Aerion Technologies - Macurco
and AIM
Gas
Detection Equipment
FMW Distributors is proud to be a distributor for
3M's AIM
and
Aerion-Macurco product
lines. To order
AIM
and
Aerion-Macurco gas detection
equipment,
or
to get pricing, please
phone 936-582-4616
or fax
POs and RFQs
to 936-448-4699.
Aerion-Macurco proves that
carbon monoxide safety can be easy
and beautiful.
FMW Distributors offers
Aerion-Macurco's
full line of high quality gas detection equipment, including its stylish new
CM-S1
carbon monoxide detector.
Designed for residential and commercial use, the
Aerion-Macurco CM-S1 delivers
unparalleled ease of installation with a simple three-step Speed Mount™ system
and compatibility with both
12-volt security systems and 24-volt fire alarm systems.
|
Model CM-S1
Carbon Monoxide Detector
|
-
SPDT alarm relay to connect to alarm control
panels or switch external alarms.
-
LED for operating status
-
12-24 VDC Power
-
Flush or surface mount
-
Long life sensor
-
All units individually calibrated
-
Small, low profile, attractive unit in a white
plastic case.
-
Detector alarms at multiple levels of exposure
to carbon monoxide based on time weighted averages of the gas present.
-
Inexpensive, easy to install.
-
Microcomputer control allows mostly automatic
operation.
-
Test & Reset switch conducts internal tests and
actuates alarm relay.
-
Solid state sensor. No maintenance or periodic
sensor replacement needed.
-
Buzzer: Produces repeating loud tone bursts
during alarm, and chirps if sensor trouble is found.
|
To get pricing on all
Aerion-Macurco
carbon monoxide, ammonia, air
quality, heating gas, hydrogen,
nitrogen dioxide and
refrigerant detectors,
phone 936-582-4616, or
fax RFQs to
936-448-4699.
AIM Portable Gas Detectors
Take workplace safety to new heights with the
Pilot by
AIM, the
finest value
in portable multi-gas detectors, featuring the power of the Instant Ready™,
pre-calibrated sensor pack at an attractive
low cost.
|
M/N 955-100-400
M/N 955-100-300
Pilot Multi-Gas Detector
|
-
Large LCD display with designated line for each
sensor reading
-
Standard – rechargeable Li-Ion battery; Optional
– Alkaline (AAA batteries)
-
Operating time of up to 18 hours (Li-lon
battery)
-
Peaks, STEL, TWA, Instantaneous Gas Levels
readings
-
Dimensions of 4.8" x 2.7" x 1.4"
-
Sensors - Combustible (catalytic bead); Oxygen
and Toxics (electrochemical)
-
Weighs 10.4 ounces (292 g)
-
LED: high = Red indicator, audible alarm of 95
dB @ 1 ft.
-
-4°F to 122°F (-20°C to 50°C) operating
temperature
-
0 to 99% operating humidity
-
Intrinsically safe Class 1, Division 1, Groups
A, B, C and D; T3 C22.2 NO 152 CSA approval
-
1.2 MB (6 months of data at 1 minute intervals
per 40 hours/week) data logging memory
-
Standard vibrator
-
Designed to meet IP65 (protected against dust
and water)
-
Immune to 450 MHz, 5 watt walkie-talkie
transmission from distance of 12 inches
-
2-year warranty on hardware, 18-month warranty
on sensor pack
-
Sensor Pack Life expectancy of 20-months
|
To get pricing on all
AIM
portable gas detectors,
fixed gas detectors and
environmental monitors,
phone 936-582-4616, or
fax RFQs to
936-448-4699.
To order
AIM
and
Aerion-Macurco gas detection
equipment, or
to get pricing, phone 936-582-4616
or fax
POs and RFQs
to 936-448-4699.
Requests For Quotes
RFQs may
be faxed to 936-448-4699.
Quotes will be responded to within 24 hours.
If
you have an emergency RFQ, please phone 936-582-4616.
RETURN
TO TOP
|
